The TL-2 2.0 tally light is a streamlined and compact unit that can be mounted on your camera to provide both a bright tally for your on camera talent and status indicator lights for your camera operator. It connects to any of our tally controllers using standard Ethernet style cable and includes a new, more robust mounting system. Using the intercom pass-through feature of one of our tally controllers like the TLC-8S the 3.5mm jack can be used to feed a signal to your...
Read More »
Quick Look: 8 Assignable Tally outputs 2 Assignable GPI outputs Intercom Pass Through Connector Compatible with TriCaster 40 2.0, TriCaster 410, 455, 460, 855, 860 , 8000, TC1, and TriCaster Mini along with the IP Series VMC1. Compatible with the TriCaster TC1 & TC2 NOT Compatible with TriCaster 450, 850 or Extreme. Use TLC-8D instead. USB Interface The TLC-8S is our microprocessor controlled tally box for the NewTek TriCaster. It is compatible with all current High Def...
Read More »
Quick Look: 6 Assignable Tally Outputs USB Interface Intercom Pass Through Compatible with TriCaster 40 2.0, TriCaster 410, 455, 460, 855, 860, TC1 and 8000 and TriCaster Mini along with the IP Series VMC1 Compatible with the TriCaster TC1 & TC2 NOT compatible with TriCaster 450, 850 and Extreme. Use the TLC-8D instead. The TLC-4S is our microprocessor controlled tally box designed for the 4 input TriCasters. Though it is compatible with all current High Def TriCasters...
Read More »
The TLC-8PRO has eight RJ-45 tally ports to drive TL-2 tally lights but also has 2 DB15HD ports with corresponding open collector outputs to drive the tally system on the popular DataVideo ITC-100 intercom. We retained the Intercom passthrough though it’s now on an 1/8″ (3.5mm) phone jack if you are also using a traditional intercom system. Support for up to eight TL-2 tally lights Intercom pass through Direct connection to DataVideo ITC-100 Intercom Compatible...
Read More »
Connect any meataSETZ tally Controller to CCUs that require a contact closure input for tally. The RU-2 connects just like one of our tally lights but rather than LEDs has two contact closure outputs (on the 3.5mm jack). The RU-2 includes a short RJ-45 cable to connect to the controller and a three foot pigtail with a right angle 3.5mm connector at one end and tinned leads at the other. Simply add a connector that matches your CCU’s tally port. Read The Manual List...
Read More »
Adapt the 1/8″ (3.5mm) Jack on the TL-2 to a 3 Pin Male XLR for analog intercom systems. List $18.00
Read More »
