TL-2 Tally Light

TL-2 Tally Light

The TL-2 2.0 tally light is a streamlined and compact unit that can be mounted on your camera to provide both a bright tally for your on camera talent and status indicator lights for your camera operator. It connects to any of our tally controllers using standard Ethernet style cable and includes a new, more robust mounting system. Using the intercom pass-through feature of one of our tally controllers like the TLC-8S the 3.5mm jack can be used to feed a signal to your...

Read More »

TLC-4S Tally Controller

TLC-4S Tally Controller

Quick Look: 6 Assignable Tally Outputs USB Interface Intercom Pass Through Compatible with TriCaster 40 2.0, TriCaster 410, 455, 460, 855, 860 and 8000 and TriCaster Mini (li>NOT compatible with TriCaster 450, 850 and Extreme. Use the TLC-8D instead. The TLC-4S is our microprocessor controlled tally box designed for the 4 input TriCasters. Though it is compatible with all current High Def TriCasters*. It connects to your TriCaster via USB and to the tally light via...

Read More »

TLC-8S Tally Controller

TLC-8S Tally Controller

Quick Look: 8 Assignable Tally outputs 2 Assignable GPI outputs Intercom Pass Through Connector Compatible with TriCaster 40 2.0, TriCaster 410, 455, 460, 855, 860 , 8000 and TriCaster Mini NOT Compatible with TriCaster 450, 850 or Extreme. Use TLC-8D instead. USB Interface The TLC-8S is our microprocessor controlled tally box for the NewTek TriCaster. It is compatible with all current High Def TriCasters* including the TriCaster 40. It connects to your TriCaster via USB...

Read More »

TLC-8D Tally Controller

TLC-8D Tally Controller

Quick Look: 8 Tally outputs (Program tally only) Tally port interface Compatible only with TriCaster TriCaster 410, 450, 455, 460, 850, 855, 860 and 8000 (any TriCaster w/tally port) NOT compatible with TriCaster 40 or Mini Designed for use specifically with the TriCaster Proline series our TLC-8D controller is an adapter box the connects to the TriCaster’s 15 pin tally port and interfaces to our tally lights or relay units. See TLC-8S for more features See TLC-4S for...

Read More »

RU-2 Relay Unit

RU-2 Relay Unit

Connect any meataSETZ tally Controller to CCUs that require a contact closure input for tally. The RU-2 connects just like one of our tally lights but rather than LEDs has two contact closure outputs (on the 3.5mm jack). The RU-2 includes a short RJ-45 cable to connect to the controller and a three foot pigtail with a right angle 3.5mm connector at one end and tinned leads at the other. Simply add a connector that matches your CCU’s tally port. Read The Manual List...

Read More »