TL-2 Tally Light

TL-2 Tally Light

The TL-2 2.0 tally light is a streamlined and compact unit that can be mounted on your camera to provide both a bright tally for your on camera talent and status indicator lights for your camera operator. It connects to any of our tally controllers using standard Ethernet style cable and includes a new, more robust mounting system. Using the intercom pass-through feature of one of our tally controllers like the TLC-8S the 3.5mm jack can be used to feed a signal to your...

Read More »

TLC-4S Tally Controller

TLC-4S Tally Controller

Quick Look: 6 Assignable Tally Outputs USB Interface Intercom Pass Through Compatible with TriCaster 40 2.0, TriCaster 410, 455, 460, 855, 860 and 8000 and TriCaster MiniĀ along with the IP Series VMC1 (li>NOT compatible with TriCaster 450, 850 and Extreme. Use the TLC-8D instead. The TLC-4S is our microprocessor controlled tally box designed for the 4 input TriCasters. Though it is compatible with all current High Def TriCasters including the TC40(2.0) and now supporting...

Read More »

TLC-8S Tally Controller

TLC-8S Tally Controller

Quick Look: 8 Assignable Tally outputs 2 Assignable GPI outputs Intercom Pass Through Connector Compatible with TriCaster 40 2.0, TriCaster 410, 455, 460, 855, 860 , 8000, TC1, and TriCaster Mini along with the IP Series VMC1. NOT Compatible with TriCaster 450, 850 or Extreme. Use TLC-8D instead. USB Interface The TLC-8S is our microprocessor controlled tally box for the NewTek TriCaster. It is compatible with all current High Def TriCasters including the TriCaster 40...

Read More »

TLC-8D Tally Controller

TLC-8D Tally Controller

Quick Look: 8 Tally outputs (Program tally only) Tally port interface Compatible only with TriCaster TriCaster 410, 450, 455, 460, 850, 855, 860 and 8000 (any TriCaster w/tally port) NOT compatible with TriCaster 40 or Mini Designed for use specifically with the TriCaster Proline series our TLC-8D controller is an adapter box the connects to the TriCaster’s 15 pin tally port and interfaces to our tally lights or relay units. See TLC-8S for more features See TLC-4S for...

Read More »

RU-2 Relay Unit

RU-2 Relay Unit

Connect any meataSETZ tally Controller to CCUs that require a contact closure input for tally. The RU-2 connects just like one of our tally lights but rather than LEDs has two contact closure outputs (on the 3.5mm jack). The RU-2 includes a short RJ-45 cable to connect to the controller and a three foot pigtail with a right angle 3.5mm connector at one end and tinned leads at the other. Simply add a connector that matches your CCU’s tally port. Read The Manual List...

Read More »